EasyManua.ls Logo

H3C S5500-EI - Ipv6 PIM-SM Admin-Scope Zone Configuration Example

H3C S5500-EI
490 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
426
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
Protocol: pim-sm, UpTime: 00:02:15, Expires: 00:03:06
# Display IPv6 PIM multicast routing table information on Switch D.
[SwitchD] display pim ipv6 routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(4001::100, FF0E::100)
RP: 1003::2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 00:14:44
Upstream interface: Vlan-interface300
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface105
Protocol: mld, UpTime: 00:14:44, Expires: 00:02:26
# Display IPv6 PIM multicast routing table information on Switch E.
[SwitchE] display pim ipv6 routing-table
Total 1 (*, G) entry; 0 (S, G) entry
(*, FF0E::100)
RP: 1003::2 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:16:56
Upstream interface: Register
Upstream neighbor: 4002::1
RPF prime neighbor: 4002::1
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface102
Protocol: pim-sm, UpTime: 00:16:56, Expires: 00:02:34
IPv6 PIM-SM admin-scope zone configuration example
Network requirements
Receivers receive VOD information through multicast. The entire IPv6 PIM-SM domain is divided into IPv6
admin-scope zone 1, IPv6 admin-scope zone 2, and the IPv6 global zone. Switch B, Switch C, and
Switch D are ZBRs of these three domains respectively.
Source 1 and Source 2 send different multicast information to FF14::101. Host A receives the multicast
information only from Source 1, and Host B receives the multicast information only from Source 2. Source
3 sends multicast information to multicast group FF1E::202. Host C is a multicast receiver for this
multicast group.

Table of Contents

Related product manuals