H3C S5500-EI User Manual

152
To configure the graft retry period:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure the graft retry
period.
pim timer graft-retry interval
Optional
3 seconds by default
For more information about the configuration of other timers in PIM-DM, see "Configuring PIM common
timers."
Configuring PIM-SM
PIM-SM configuration task list
Task Remarks
Enabling PIM-SM Required.
Configuring an RP
Configuring a static RP
Required.
Use any a
pproach.
Configuring a C-RP
Enabling auto-RP
Configuring C-RP timers globally Optional.
Configuring a BSR
Configuring a C-BSR Required.
Configuring a PIM domain border Optional.
Configuring global C-BSR parameters Optional.
Configuring C-BSR timers Optional.
Disabling BSM semantic fragmentation Optional.
Configuring administrative scoping
Enabling administrative scoping Optional.
Configuring an admin-scope zone
boundary
Optional.
Configuring C-BSRs for each admin-scope
zone and the global-scope zone
Optional.
Configuring multicast source registration Optional.
Disabling the switchover to SPT Optional.
Configuring PIM common features Optional.
Configuration prerequisites
Before you configure PIM-SM, complete the following tasks:

H3C S5500-EI Specifications

General

Brand	H3C
Model	S5500-EI
Category	Switch
Language	English