16
Figure 21 Selecting View Associated Drives
Configuring hot spare drives
For data security purposes, configure hot spare drives after configuring a RAID array. You can
configure global hot spare drives or dedicated hot spare drives.
A hot spare drive can be used only for RAID levels with redundancy.
The capacity of a hot spare drive must be equal to or greater than the capacity of the smallest
drive in the RAID array.
• Only the drive in Unconfigured Good state can be configured as a hot spare drive.
Configuring a global hot spare drive
1. On the storage controller configuration screen as shown in Figure 22, select Drive
Management and press Enter.
To Next Page
Loading...
