Need help?Do you have a question about the H3C UniServer R4950 G3 and is the answer not in the manual?
General| Processor | Intel Xeon Scalable processors |
|---|---|
| Processor Sockets | 2 |
| Form Factor | 2U Rack |
| Memory | Up to 3TB |
| Memory Slots | 32 DIMM slots |
| Storage | Up to 12 LFF or 24 SFF drives |
| RAID Support | RAID 0, 1, 5, 6, 10, 50, 60 |
| Network Interface | 4 x 1GbE ports |
| Power Supply | 800W/1600W PSU options |
| Operating System Support | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi |
Details about the embedded RSTe/VROC RAID controller.
Overview of tasks for configuring RAID arrays in UEFI mode.
How to configure a global hot spare drive.
How to configure a dedicated hot spare drive.
Steps to configure VMD settings for NVMe RAID.
Details about the NVMe VROC module.
Details about RAID-P430-M1 and RAID-P430-M2 storage controllers.
Details about the HBA-LSI-9300-8i storage controller.
How to configure storage controller settings in UEFI mode.
Overview of tasks for configuring storage controller settings.
Details about the RAID-MARVELL-SANTACRUZ-LP-2i controller.
How to configure RAID arrays through the controller in UEFI mode.
Steps to access the controller configuration screen.
How to configure RAID arrays.
To Next Page
