37
Erasing a physical drive
1. On the storage controller configuration screen as shown in Figure 62, select Drive
Management and press Enter.
Figure 62 Storage controller configuration screen
2. On the screen as shown in Figure 63, select the target drive and press Enter.
Figure 63 Drive Management screen
3. On the screen as shown in Figure 64, select Operation and press Enter.
4. On the dialog box that opens, select Drive Erase and press Enter.
For some controllers, you must select Cryptographic Erase for a SAS drive and select Drive
Erase for a SATA drive.
To Next Page
Loading...
Need help?
General
