61
Figure 123 Selecting a network interface
11. Select a method for specifying an IP address for the management interface, and then click OK.
 Automatic configuration (DHCP)—Obtains an IP address through DHCP.
 Static configuration—Manually specify an IP address. If you select this option, you must
also specify an IP address, mask, and gateway address.
Figure 124 Specifying an IP address
12. Configure DNS by using either of the following methods, and then click OK.
ï‚¡ Automatically set via DHCP.
ï‚¡ Manually specify. If you select this option, you must specify an IP address for a minimum of
one DNS server.
To Next Page
Loading...
