13
Figure 225 Viewing kernel driver in use
Installing an FC HBA driver (for VMware OSs)
This section updates the driver of the FC-HBA-QLE2692-16Gb-2P-1-X FC HBA for VMware 6.7.
Prerequisites
1. Install the tool for remote access on the local client.
2. Configure the IP settings for the VMware OS. Make sure the OS can reach the local client.
Figure 226 Configuring the IP settings
3. Obtain the driver from the H3C website, and then upload the VMware OS.
To Next Page
Loading...
Need help?
General
