H3C UniServer R4950 G5 User Manual

49
Figure 86 Choose the operation
6. On the screen as shown in Figure 87, select the target drives. ([Enabled] following a drive
means that the drive has been selected.) Then, select Apply Changes and press Enter.
Figure 87 Adding drives
7. On the screen as shown in Figure 88, select Confirm and press Enter. On the dialog box that
opens, select Enabled and press Enter. Then, select Yes and press Enter.

H3C UniServer R4950 G5 Specifications

General

Brand	H3C
Model	UniServer R4950 G5
Category	Server
Language	English