3
RAID
configuration
Whether
services are
Application scenarios Reference
Use command lines
or a third-party tool to
configure RAID in the
OS.
No
Applicable to the following scenarios
• Use ARCCONF Command Line
Utility to configure RAID with a
PMC storage controller.
• Use StorCLI to configure RAID
with an LSI storage controller.
• Use Intel VROC 6.0 PV GUI to
configure RAID with a VROC
module in a Windows operating
system.
• Use command lines to configure
RAID with a VROC module in a
Linux operating system.
Tool user guide from
third parties
To Next Page
Loading...
