To Next Page
P
Philip Krause MDJul 27, 2025
How to fix bent brushes on Haaga 475 Blower?
- MMichelle MurrayJul 27, 2025
Bent brushes on your Haaga Blower are likely due to improper storage. Straighten the brushes to resolve this issue.
How to fix bent brushes on Haaga 475 Blower?
Bent brushes on your Haaga Blower are likely due to improper storage. Straighten the brushes to resolve this issue.
Why are the brushes on my Haaga 475 Blower bent?
Bent brushes on your Haaga Blower are likely due to improper storage. Straightening the brushes should correct this.
Why does my Haaga 475 Blower move sluggishly?
If your Haaga Blower is moving sluggishly, several factors could be the cause. First, the sweeper might be dirty, requiring a cleaning. Second, the brushes may be blocked, necessitating blockage removal. Third, the brush drives could be dirty, also requiring cleaning. You may also need to lubricate the brush drives with lubricant spray. Finally, the height adjustment may be set too low, increasing the contact pressure of the disc brushes, so adjust the height.
How to fix a Haaga 475 that does not run smoothly?
To address a Haaga Blower that isn't running smoothly: * Clean the sweeper. * Eliminate any blockage. * Clean the brush drives. * Lubricate the brush drives with lubricant spray. * Adjust the height if it is set too low.
Lists the model numbers for the sweeper.
Details the version and creation date of the instructions.
States the copyright holder and rights reserved.
Explains warning, caution, and note symbols used in the manual.
States the company reserves the right to make product changes.
Outlines warranty conditions, required parts, and claim procedures.
Defines the intended users and necessary conditions for operation.
Specifies the sweeper's commercial and debris removal purpose.
Details safety precautions for operating and maintaining the sweeper.
Provides guidelines for safely transporting the sweeper.
Covers safety checks and conditions before operating the sweeper.
Lists safety rules and hazards during sweeper operation.
Explains how to determine if the waste bin is full.
Guides on how to clean the sweeper for optimal function and longevity.
Details steps to take after finishing work with the sweeper.
Provides guidelines for safely storing the sweeper.
Outlines how to perform maintenance and when to seek repairs.
Advises on the correct and environmentally safe disposal of the sweeper.
Lists and illustrates the key parts of the sweeper.
Instructions for assembling the push handle for model 475.
Instructions for assembling the push handle for models 477/497.
Step-by-step guide for operating the sweeper manually.
Details how to adjust the sweeper's height for different surfaces.
Instructions on how to safely remove and empty the waste bin.
Provides instructions for cleaning the sweeper after use.
Safety instructions and methods for carrying the sweeper.
Guidelines for securely transporting the sweeper in a vehicle.
Steps to remove the push handle from the 475 model for storage.
Steps to remove the push handle from models 477/497 for storage.
Instructions for proper and safe storage of the sweeper.
Covers routine maintenance checks before and after use.
Specific checks to perform on the sweeper before operation.
Tasks to complete after finishing work with the sweeper.
Maintenance tasks recommended after 8 hours of use.
Detailed steps for cleaning the dust filter on specific models.
How to remove blockages from brushes and axles.
Instructions for lubricating the brush drives with specific spray.
Method for straightening bent bristles using heat.
Identifies causes and remedies for poor sweeper movement.
Explains how to fix bent brushes, usually due to improper storage.
Lists causes like missing sweeping lip for poor performance.
General
