To Next Page
B
Barbara PearsonJul 27, 2025
What to do if the Haaga 677 Blower brushes are bent?
- JJennifer MorganJul 27, 2025
If the brushes on your Haaga Blower are bent, it's likely due to improper storage. Straighten the brushes to resolve this.
What to do if the Haaga 677 Blower brushes are bent?
If the brushes on your Haaga Blower are bent, it's likely due to improper storage. Straighten the brushes to resolve this.
Why is the sweeping performance of my Haaga 677 inadequate?
Inadequate sweeping performance of your Haaga Blower might be because the sweeping lip is missing, loose, or heavily worn. In this case, replace the sweeping lip.
What to do if my Haaga 677 Blower sweeper moves sluggishly or doesn't run smoothly?
If your Haaga Blower sweeper isn't running smoothly, several factors could be the cause. The sweeper itself might be dirty, so cleaning it is advised. The brushes might be blocked; if so, eliminate the blockage. The brush drives could be dirty, requiring a cleaning. You can also lubricate brush drives with lubricant spray. The height adjustment might be set too low, or the contact pressure of the disc brushes might be too high, so adjust the height.
General
