Need help?Do you have a question about the HACH LANGE Filtrax and is the answer not in the manual?
General| Light Source | LED |
|---|---|
| Wavelength | 860 nm |
| Measurement Principle | Nephelometry |
| Outputs | 4-20 mA, Digital communication |
| Power Supply | 100-240 VAC |
| Operating Temperature | 0 - 50 °C (depending on model) |
| Ingress Protection | IP65 |
General safety instructions, hazard symbols, and precautionary labels for operating the equipment safely.
Details the components and operation of the FILTRAX sampling and sample conditioning system.
Guidance on selecting an installation location and performing physical mounting of the instrument.
Step-by-step instructions for mounting the control unit using the specified bracket.
Instructions for properly connecting the suction and sample tubes to the system.
Details on how to safely connect the device to the power supply.
Steps to follow for the initial setup and start-up of the FILTRAX instrument.
Describes critical faults, their root causes, and immediate rectification actions.
To Next Page
