Option Description
Add to Favorites Add the selected method and add it to favorites for faster access. Refer to Add or delete
a favorite program on page 15.
New Program Make a new user program.
Edit Program Change and update an existing program.
Remove Program Erase the selected user program.
3. Push New Program to make a new user program.
4. Obey the screen prompts to complete the procedure.
Add or delete a favorite program
Stored programs, LCK/TNTplus methods and user programs methods which are often used can be
saved in the favorites list.
• To add a method to the favorites list, select the specific method and push Options>Add to
Favorites>Select. Push OK.
• To erase a program from the favorites list, push SETTINGS>Favorites/User Programs. Select
the program to be removed and push Options>Remove Program>Select. Push OK to confirm.
Set my workflow
Use my workflow for the parallel collection of samples at different locations.
1. Push SETTINGS>My Workflow>Options>New My Workflow.
2. Select a program from stored programs, LCK or TNTplus methods or user program.
3. Enter the number of samples that need to be taken and a workflow name.
Note: The default workflow tab names are sequential and include the workflow name.
4. Select the workflow.
5. Use the navigation keys (LEFT and RIGHT arrows) to toggle between the different tabs.
6. Push Zero or Read to start the first reading. Toggle to each sample in the workflow to make the
remaining measurements.
To change the default workflow tab names (e.g., location), select Options>Edit My Workflow.
To delete the workflow, select Options>Delete My Workflow.
Use shortcuts for faster access
The navigation keys are shortcuts to access sub-menus faster in some programs.
1. Push SETTINGS>All programs/Methods>LCK or TNTplus Methods or Stored
Programs/Methods.
2. Select a program, then push Start.
3. Push one of the navigation keys for the applicable options.
Option Description
RIGHT arrow Show the concentration results in different chemical forms.
LEFT arrow Show the absorbance of each reading during one measurement.
DOWN arrow Toggle between Concentration, Absorbance and %Transmittance.
4. Push SETTINGS>Photometer Functions>Single Wavelength or Multi Wavelength.
5. Push one of the navigation keys for the applicable options.
Option Description
RIGHT arrow Enter the wavelength setting menu.
English 15
To Next Page
Loading...
