To Next Page
M
Melissa CamposAug 3, 2025
What to do if Hach Laboratory Equipment shows clock battery failure?
- EEmma JacksonAug 3, 2025
If the Hach Laboratory Equipment clock battery fails, fax a system status printout to technical support for assistance.
What to do if Hach Laboratory Equipment shows clock battery failure?
If the Hach Laboratory Equipment clock battery fails, fax a system status printout to technical support for assistance.
Detailed physical and functional specifications for the particle counter hardware.
Specifies particle size ranges, flow rates, zero count, coincidence loss, and count efficiency.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE hazard symbols.
Describes safety symbols found on the instrument and their associated meanings.
Safety guidelines for making electrical connections and handling power.
Precautions to prevent damage from static electricity to sensitive components.
Step-by-step guide for correctly installing the instrument's power source.
Configuration steps for establishing serial communication (RS232/RS485).
Configuration steps for connecting the instrument via an Ethernet network.
Configuration steps for establishing a wireless (Wi-Fi) connection.
Steps to configure security settings for the instrument's wireless network connection.
Instructions on selecting the operation mode during the instrument's first startup.
Procedure to switch between Basic and Advanced operation modes after initial setup.
Steps to set and synchronize the instrument's internal clock and date.
Configure how alarm reasons are captured and managed for recorded events.
Define high and low alarm thresholds for monitoring the instrument's flow rate.
Steps to define a new test location, including name and ID.
Modify existing settings for a previously defined test location.
Set count cycles, count mode, run mode, and timing for a specific location.
Configure specific alarm settings and thresholds for individual test locations.
Define a new geographical area to group related test locations.
Create a group of locations that share common sampling attributes.
Configure custom particle size channels for measurement and analysis.
Activate password protection and user login for instrument access control.
Step-by-step guide to perform particle count measurements using the instrument.
Overview of the diagnostics screen for identifying and resolving instrument issues.
General| Brand | Hach |
|---|---|
| Model | MET ONE 3413 |
| Category | Cash Counter |
| Language | English |
