Figure 4 Display overview
1 Calibration icon 4 Battery icon 7 Calibration standard expected
1
2 Lock icon 5 Parameter value 8 Temperature
3 Parameter 6 Calibration standard measured for
last calibration (high)
Table 1 Display icons
Icon Description
Shows the battery power level. Flashes when the battery power is less than 10%.
Shows when the lock feature is on. When the lock feature is on, the parameter value on the display does not change.
Push to set the lock feature to on or off.
Shows when the tester is in calibration mode.
Keypad description
Figure 5 shows the keypad. Table 2 gives the key descriptions.
Figure 5 Keypad overview
1 Power key 2 Calibration/Settings key 3 Lock key
1
Shows during calibration
6
To Next Page
Loading...
