PB
1
ASSEMBLY GUIDE
In this kit you will continue to assemble the centre-left side of the Xenomorph’s
head and add more appendages.
KIT 7: CENTRE
-
LEFT
SECTION OF THE HEAD
7-1 7-2 7-3 7-4
7-67-5
7-8 7-97-7
PARTS SUPPLIED
Ref. Name Qty.
7-1 Centre-left Section of the Head 1
7-2 Pipe 1 (centre-left section) 1
7-3 Pipe 2 (centre-left section) 1
7-4 Pipe 3 (centre-left section) 1
7-5 Pipe 4 (centre-left section) 1
Ref. Name Qty.
7-6 Pipe 5 (centre-left section) 1
7-7 Pipe 6 (centre-left section) 1
7-8 Pipe 7 (centre-left section) 1
7-9 2.3x6mm screws 4*
* A spare screw is also supplied in case of loss or damage.