Hachette ALIEN - Attach Pipe 6-4 to Head Section; Attach Pipe 6-5 to Head Section

2
3
KIT 6: FRONT-LEFT SECTION OF THE HEAD
5
6-1
6-4
6
6-5
6-1
KIT 6 IS COMPLETE
Pipes and other parts have been
fitted to the front-left portion
of the head.
Turn the Head Section 6-1 around,
as shown. After test-fitting, apply a
little glue to the tabs on Pipe 6-4
and secure in place.
Finally, apply a little glue to the tabs
on Pipe 6-5 and fit it into the slots
in the front-left section of the Head
6-1, as shown.
! Keep parts 6-6 and 6-7 safely aside until they are needed in the next kit.