Hachette ALIEN - Attach Pipe 8-4 to Head Section; Attach Pipe 8-5 to Head Section

2
3
KIT 8: FRONT-RIGHT SECTION OF THE HEAD
6
8-5
8-1
KIT 8 IS COMPLETE
5
8-1
8-4
Turn the Front-right Section of
the Head 8-1 around so that it
is positioned as shown. Test-fit
the four tabs on Pipe 8-4 into
the corresponding slots on head
section 8-1. As before, apply a
little glue to secure the part in
place.
Finally, check that the tabs on
Pipe 8-5 fit properly in the slots
indicated in the Head section
8-1. Apply a little glue and
secure firmly in place.
More parts have been
fitted to the head.
! Keep the Pipes 8-6 and 8-7 safely aside until they are needed in a future kit.