Hachette ALIEN - Assemble Neck Part 10-6 with Washer 10-5

2
3
KIT 10: THE HEAD AND NECK
4
10-6
10-5
KIT 10 IS COMPLETE
Further parts have been
fixed to the head and work
has started on the neck.
Slot Washer 10-5 into the central
hole in Neck 10-6, as shown. Note
that part 10-5 is tapered and the
smaller end goes at the bottom of
part 10-6.
! Keep parts 10-4, 10-5 and 10-6 safely aside until they are needed in a future kit.