Hachette ALIEN - Attach Skull Pipe 5-6; Attach Skull Pipes 5-7 and 5-8

4
PB
KIT 5 IS COMPLETE
6
7
5-1
5-1
3-1
1-1
5-7
5-8
5-6
PIPES HAVE BEEN FITTED
ALONG THE LEFT-HAND SIDE
OF THE SKULL.
KIT 5: SKULL & APPENDAGE
The line of pipes ends with the tabs
on Pipe 5-6 fitting into the last four
slots in Skull 5-1. Again, apply a
little glue to the tabs to secure the
part firmly in place.
The last two Pipes 5-7 and 5-8
are fitted into the slots under the
lower edge of the Skull 1-1, 3-1
and 5-1, as shown. Take time to
test-fit these parts before applying
a little glue to the tabs and
securing them firmly in place.