Hachette ALIEN - Attach Skull Pipe 5-4 to Skull Part 3-1; Attach Skull Pipe 5-5

2
3
KIT 5: SKULL & APPENDAGES
4
5
5-4
5-1
5-5
3-1
3-1
In a similar way, test-t the three tabs
on Pipe 5-4 into the slots in Skull part
3-1 so as to continue from Pipe 5-3.
Apply a little glue to the tabs to hold
the part rmly in place.
The pipes continue with the four tabs
on Pipe 5-5 being fitted into the next
four slots. Apply a little glue to the
tabs and secure 5-5 firmly in place.