User Guide Prog-Box
Thank you for purchasing a Hacker Brushless Motors product. The MASTER Prog-Box
was developed in close cooperation with JETI and incorporates the latest technological
developments. Hacker MASTER brushless, sensorless motor controllers are designed
with particular emphasis on reliability and easy, transmitter-based programming of most
parameters. The Prog-Box additionally leverages the greatly expanded programming
capabilities of these new controllers by allowing individual adjustment of virtually all pa-
rameters.
Although the programming sequences of the MASTER Controllers are particularly logical
and therefore quite simple, programming via the MASTER Prog-Box requires a little
knowledge and a few basic skills. Reading this user guide attentively prior to initial opera-
tion will enable you to familiarize yourself with the concepts of this device enabling quick
and sure programming. Please pay particularly close attention to the safety tips.
We wish you much joy and success with your MASTER series products.
Table of contents
Page
1. Safety and operating instructions 3
2. Limitation of liability 4
3. Product description 4
4. Connections and controls 5
5. Initial operation of the MASTER Prog-Box 5
6. Programming MASTER controllers using the Prog-Box 6
6.1 Operating principles 6
7. Warranty 6
8. Declaration of conformity 7
A-3 MASTER Prog-Box: Programming Options
A-4 MASTER Prog-Box: Menu Explanations
A-5 MASTER Prog-Box: Programming Sequences
To Next Page
Loading...