User Guide Prog-Box
2. Limitation of liability
As Hacker Motor GmbH has no ability to ascertain whether our controllers are installed
and used in conformance with our recommendations, and as we can not verify how our
controllers were maintained, Hacker Motor GmbH can not assume any liability for losses,
damages or costs arising from their use. Any and all claims arising from the use, failure,
or malfunction of our products, or in any way arising in conjunction therewith, will be re-
fused. Hacker Motor GmbH assumes no liability for personal injury, property damage or
consequential damages arising resulting from the use of our products or arising from our
workmanship. To the maximum legally permissible extent, liability claims arising for any
reason will be limited to the selling price of the Hacker Motors GmbH product involved.
Exceptions will only be made as required by legislation or if gross negligence on the part
of Hacker Motor GmbH results in the exclusion of the limitation of liability.
3. Product description
MASTER controllers contain highly sophisticated circuitry and were specifically designed
for the use with Hacker brushless motors. Their flexible and effortless programmability
combined with support for different operating modes additionally makes them ideal for
use with other brushless motors. Compact dimensions enable these controllers to fit into
the smallest models.
All Master controllers may be programmed by using a transmitter or by using a MASTER
Prog-Box. While the programming capabilities available via transmitter are identical to
those provided by our previous MASTER controllers, the MASTER Prog-Box enables the
entire range of programming functionality to be accessed.
All settings must only be programmed once. The controller saves the configuration set-
tings until they are overwritten by the next programming sequence. This holds true even
if the power source is disconnected.
An overview of all programming possibilities may be found in Annex A-3 and A-4.
To Next Page
Loading...