User Guide Prog-Box
6. Programming MASTER controllers using the Prog-Box
6.1 Operating principles
Since the programming of the many different models of Hacker brushless controllers is
essentially identical, the individual programming steps described apply to all our control-
lers.
Please pay close attention to the programming sequences in Annex A-5
Ensure that the motor battery, or for controllers without BEC, the receiver battery, has
sufficient capacity for the programming to be completed. All changes to parameters or
settings are acoustically confirmed by the motor, the controller immediately saves the
new settings. Multiple parameters may be changed during each programming session
and the parameters may be changed as often as desired.
Please study the programming capabilities in Annex A-3 carefully
7. Warranty
Every MASTER Prog-Box undergoes numerous tests during production and we place
particular emphasis on ensuring that our products are of the highest possible quality.
Hacker Motors GmbH products are covered by a 24-month warranty. The warranty is
limited to a free-of-charge repair provided proof of a material failure can be established.
We reserve the right to replace a device if an economically feasible repair is not possible.
Proof of warranty may be provided by the receipt or invoice issued in conjunction with the
purchase of the product. In the event of a repair, the warranty will not be extended. Incor-
rect use or operation arising for example from incorrect polarity, excessive voltage or
moisture will result in the denial of a warranty claim. Defects arising from wear and tear
or vibration will also be treated in the same manner. Any other claims, consequential
damages for example, are explicitly precluded. Also excluded are any and all liabilities
for damages arising from the device itself or use thereof.
All products returned for repair must be sent free-of-charge to Hacker Motor GmbH, par-
cels sent with postage or other fees due cannot be accepted. We can not assume re-
sponsibility or liability for damages or losses occurring in shipping.
Warranty claims will be honored provided that the following conditions are met:
• The invoice or receipt for the product to be repaired is included
• The product was used in accordance with this user guide
• The product was used with the recommended voltages and currents
• A clear description of the problem or defect is included