www.haden.com 09
INSTALLATION AND CONNECTION
Please ensure that this cooker is installed by an Electrical Service
Engineer.
INSTALLATION AND PREPARATION FOR USE WARNING
This appliance must be installed by an authorised service engineer or
qualified electrical technician, according to the instructions in this
guide and in compliance with the current local regulations.
• Incorrect installation may cause harm and damage, for which the
manufacturer accepts no responsibility and the warranty will not be
valid.
• Prior to installation, ensure that the local distribution conditions,
electricity voltage and frequency of the appliance are compatible. The
operating conditions for this appliance are stated on the label.
• The laws, ordinances, directives and standards in force in the country
of use are to be followed (safety regulations, proper recycling in
accordance with the regulations, etc.).
INSTRUCTIONS FOR THE INSTALLER GENERAL INSTRUCTIONS
• After removing the packaging material from the appliance and its
accessories, ensure that the appliance is not damaged. If you suspect
any damage, do not use it and contact an authorised service person
or qualified technician immediately.
• Make sure that there are no flammable or combustible materials in
the close vicinity, such as curtains, oil, cloth etc. which may catch
fire.
• The worktop and furniture surrounding the appliance must be made
of materials resistant to temperatures above 100°C.
• The appliance should not be installed directly above a dishwasher,
To Next Page
Loading...
