Haemonetics Cell Saver Elite+ User Manual (English)

Other manuals for Haemonetics Cell Saver Elite+

User Manual230 pages

User Manual Addendum20 pages

Questions and Answers:

J
Julie CoffeyAug 7, 2025
What to do if Haemonetics Medical Equipment touch screen is not refreshing properly?
- W
  woodjohnAug 7, 2025
  If your Haemonetics Medical Equipment's touch screen is not refreshing correctly and parts of the screen appear frozen, try this: Touch 'Menu,' then select a different option from the drop-down list than the one currently displayed. This should refresh the screen. After the screen refreshes, touch 'Menu' again and re-select the original option from the drop-down list to return to the first screen.
D
Dr. Charles HernandezAug 12, 2025
What to do if Haemonetics Cell Saver Elite+ touch screen is locked up?
- S
  shansenAug 12, 2025
  If the touch screen on your Haemonetics Medical Equipment has locked up and is unresponsive, the first step is to restart the device. When the device restarts, you'll be given the option to either continue with the previous procedure or start a new one. Choose the option that suits your needs.
E
Erica MilesAug 16, 2025
What to do if Haemonetics Cell Saver Elite+ Medical Equipment displays 'Waste Bag Full'?
- E
  Elizabeth StanleyAug 16, 2025
  If the 'Waste Bag Full' message appears on your Haemonetics Medical Equipment, you should either empty or replace the waste bag. After doing so, touch 'Continue' to proceed. When emptying the waste bag, make sure the fluid level in the bag stays above the 1-liter mark. When replacing the waste bag, ensure the bowl is empty; if not, return its contents to the reservoir and process them again.
F
Frederick NashAug 20, 2025
What to do if Haemonetics Medical Equipment detects air during fill?

Haemonetics Cell Saver Elite+ Specifications

General

Power Supply	100-240 VAC, 50/60 Hz
User Interface	Touchscreen display
Automated Processing	Yes
Relative Humidity	20% to 80%, non-condensing
Data Management	Data logging and reporting
Anticoagulant	Citrate
Wash Volume	Adjustable
Bowl Size	125 mL, 225 mL
Processing Time	Typically 3-5 minutes per cycle
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Category	Intraoperative Blood Recovery System