NOTE:
In order to see the type and model of the machine, please see the
specication plate. Usually found on the back of the machine. See
example (Fig.1)
Fig.1
TURRET MILL
MACHINE
MODEL NO.
SERIAL NO.
DATE OF MANF.
NOTE:
This manual is only for your reference. Owing to the continuous improvement
of the machine, changes may be made at any time without obligation or notice.
Please ensure the local voltage is the same as listed on the specication plate
before operating this electric machine.
Distributed by
www.machineryhouse.co.nz
MACHINE DETAILS
To Next Page
Loading...
