Need help?Do you have a question about the Hafler DH-110 and is the answer not in the manual?
General| Type | Preamplifier |
|---|---|
| Frequency Response | 20 Hz to 20 kHz |
| Weight | 12 lbs |
| Input Impedance | 47k ohms |
| Inputs | Phono, Tuner, Aux, Tape |
| Outputs | Main |
| Output Level | 1.0 V |
| Power Supply | 120V AC, 60Hz |
| Output Impedance | 600 Ohms |
| Signal to Noise Ratio (Phono) | 80dB |
| Output (Preamp out) | 1V RMS |
Technical details for the phono preamplifier stage, including output, distortion, and frequency response.
Technical details for the line amplifier stage, including output, distortion, and frequency response.
Instructions for connecting the DH-110 to AC power, including voltage selection and accessory outlets.
Essential techniques and tips for making reliable solder connections during kit assembly.
Guidance on preparing and connecting wires according to the kit instructions and diagrams.
To Next Page
