Need help?Do you have a question about the Hafler DH500 and is the answer not in the manual?
Proper grounding, plug use, cord safety, and risk of electric shock warnings.
Supervision, avoiding water, hearing safety, ventilation, heat, unplugging, and spill precautions.
Qualified personnel for servicing, avoid unauthorized modifications.
Identifies controls like Volume, Signal, Power, and indicators.
Lists and identifies rear panel connectors for input, output, and power.
Instructions for opening the package and checking for shipping damage.
Advice on placement, airflow, and connecting speakers and sources.
How to set up and operate the amplifier in stereo mode.
Instructions for using the amplifier in bridge mono mode.
Recommendations for operation, switch settings, and cable connections.
Explains the power indicator and signal protection circuit.
General| Speaker Load Impedance | 4 to 16 ohms |
|---|---|
| Power Output | 250W per channel into 8 ohms |
| Damping Factor | Greater than 100 |
| Input Sensitivity | 1.5V for full output |
| Signal-to-Noise Ratio | Greater than 100 dB |
| Dimensions | 19" x 5.25" x 14" |
To Next Page
