12. Connect the power pack to the mains
(220 V).
13. Put the handset on the base.
Electrical shock
hazard
TIP: to make it easier to pick the handset up, the removable transparent cover can be removed.
The handset displays
this message for 2 sec.:
Then IN CHARGE if the
battery is not sufficiently
charged.
If the
battery is
sufficiently
charged.
You can now move on to the next chapter describing how to install the doorphone.
➀
➁
IMPORTANT: the mains socket must remain
accessible so that the power pack can be easily
disconnected.
or
188
GB
To Next Page
Loading...
