hager TX216 - Page 124

hager
"DALI Gateway C00Cx2" software
Parameters
Seite 124 von 130
Cyclical transmission of
feedback telegram ?
Yes (cyclical transmission and
transmission in case of
changes)
No (transmission only in
case of changes)
The object value of the feedback can be
transmitted in cycles.
The feedback telegram is transmitted to the
bus in cycles and after a change of status.
Generally, the cycle time will be
programmed on the “Groups” parameter
card for all feedback telegrams.
The feedback telegram is transmitted to the
bus only after the status has changed.
• This parameter becomes visible only in
case of an actively transmitting feedback
object.