hager TX216 - Page 73

hager
"DALI Gateway C00Cx2" software
Functional description
Seite 73 von 130
Setting and enabling the Soft-OFF function
The Soft-OFF function can be set separately for each group in the plug-in of the DALI Gateway.

Set the “Soft-OFF function” parameter in the “Groups - [x] group name – Switch-on/ switch-off
behaviour" parameter node to “Yes”.
The Soft-OFF function is now enabled. The parameter for the dimming time of the Soft-OFF function
becomes visible.

Configure the “Time for Soft-OFF (0...100 %)” parameter in the "Groups - [x] group name – switch-
on-/switch-off behaviour" parameter node to the required dimming time.