Need help?Do you have a question about the Hague Quality Water Hydroclean HC3 and is the answer not in the manual?
General| Brand | Hague Quality Water |
|---|---|
| Model | Hydroclean HC3 |
| Category | Water Dispenser |
| Language | English |
Provides an overview of the Hague water treatment appliance and its benefits.
Tips and procedures to ensure optimal performance and benefits from the water treatment appliance.
Guides the user through setting the current time on the appliance controller.
Guides the user through setting the preferred time for appliance regeneration.
Guides the user through setting the number of people in the household for optimal appliance operation.
A pre-installation checklist to ensure all requirements are met before setting up the appliance.
Important safety guidelines and warnings to follow during installation and operation.
Comprehensive steps for installing and starting up the water treatment appliance.
Instructions on preparing the physical location for the water treatment appliance installation.
Instructions for connecting the appliance's water inlet and outlet lines.
Instructions on how to add salt to the brine tank.
Final steps to complete the appliance installation and initial setup.
Explanation of the bypass valve's function, location, and operation for maintenance or untreated water use.
Instructions on how to use the Regenerate button for immediate regeneration or scheduling.
Selecting the operating mode (Timer or Demand Delayed) for the appliance.
Inputting the tested hardness of the water for appliance calibration.
Appliance operates based on a set regeneration frequency.
Appliance regenerates based on water usage and capacity depletion.
Guidance on using service settings for desired capacity in different operating modes.
Lists the necessary tools and materials for refilling neutralizing media.
Step-by-step instructions for refilling the neutralizing media in the HC3 1NF filter.
Initial step to shut off the water supply to the appliance.
Method to determine the quantity of new media needed based on freeboard measurement.
Performing a backwash cycle to settle the new media and ensure proper operation.
A worksheet to help determine how often the iron filter needs to regenerate.
A worksheet to calculate the monthly regenerant usage for the iron filter.
Initial steps for installing the iron filter, referencing general installation procedures.
Steps for adding the potassium permanganate chemical to the feeder.
Final steps to complete the iron filter and feeder installation.
Explains the assembly of the hook-up components and the controller cover.
Details the components and assembly of the standard brine tank.
Lists and illustrates the parts comprising the main control valve assembly.
Lists and illustrates the parts of the bypass valve assembly.
Lists and illustrates the parts of the drive end cap assembly.
Details the components and assembly of the injector mechanism.
Addresses issues causing lack of soft water post-regeneration, including possible causes and solutions.
Troubleshooting steps for a blank or unresponsive display on the appliance controller.
Addresses issues where the appliance remains stuck in the regeneration cycle.
Addresses the cause of salty or pink water, often related to iron filters.
Provides descriptions of the different filter types available for the appliance.
Lists detailed specifications for special series models with the five-button controller.
To Next Page
