CONTROLLER FEATURES & SETTINGSPAGE 2
ENGLISH
3
8
6
19
4
17
18
14
13
109
7
5
16
2
15
11
12
1
1
Power Button
Press the ON/OFF button on the remote control to start
the unit.
2
TURBO/QUIET Button
The TURBO function is used for fast heating or cooling.
Press the TURBO/QUIET
button once and the remote
icon on the bottom right
function.
fast rest or reading. Press the TURBO/QUIET
button
display the QUIET
icon on the bottom left side of the
remote display.
Press the TURBO/QUIET
button a third time to cancel
TURBO/QUIET and return to normal operation.
Note:
-
der cooling or heating mode (not for auto or fan mode).
Running the unit in QUIET mode for a long period of time
may cause the room temperature to not reach the set
fan speed to a higher setting.
3
COOL Button
fan speed according to room temperature. The
displayed during COOL mode.
4
HEAT Button
the time due to cold-air prevention function. When FAN is
fan speed according to room temperature. The
displayed during HEAT mode.
5
DRY Button
setting. The
6
Temperature +/- Buttons
setting increases.
setting decreases.
7
AUTO Button
to set temperature. When FAN is set to AUTO the air condi-
temperature. The
8
FAN Button
Fan speed selection
Press the FAN
Remote control:
LOW
MED HI
AUTO
Display
circulated
speed.
9
Louver SWING Button - Vertical
Remote Controller
20
To Next Page
Loading...
Need help?
General
