Haier A3FE737CPJM - Installation; Unpacking and Environmental Conditions; Space, Ventilation, and Alignment

EN
10- Installation
10.1 Unpacking
▶ Take the appliance out of the packaging.
▶ Remove all packaging materials.
10.2 Environmental conditions
The room temperature should always be between 10° C and 43° C, since it can inuence
the temperature inside the appliance and its energy consumption. Do not install the appli-
ance near other heat-emitting appliances (ovens, refrigerators) without isolation.
10.3 Door reversibility
Before the appliance is permanently installed, check the correct position of the door
hinge. If necessary see section the DOOR REVERSIBILITY.
10.4 Space requirement
Required space when door is opened (Fig. 10.4):
WARNING!
▶ The appliance is heavy. Always handle with at least two persons.
▶ Keep all packaging materials out of children´s reach and dispose them in an environ-
mentally friendly manner.
10.5 Ventilaton cross-section
To achieve sucient ventilation of the appliance for
safety reasons, the information of the required venti-
lation cross sections must be observed (Fig. 10.5).
W2
D2
D1
W1
10.4
100 mm
200 mm
100 mm
100 mm
10.5
29
Appliance
width in mm
Appliance
depth in mm
Model W1 W2 D1 D2
A3FE737CPJM 595 925 580 1200