Haier AB12CS1ERA - Page 117

Indoor Unit
115
Super Match
Item Model AD18LS1ERA
Function cooling heating
Capacity KW 5.0(1.8~6) 5.5(2~6.2)
Sensible heat ratio 0.73 /
Total power input KW 1.53(0.55~2.1) 1.47(0.6~2.1)
Max. power input W
2100 2100
EER or COP W/W 3.26 3.73
Dehumidifying capacity 10
-
³×m³/h 2.1
Power cable H05RN-F 4G 4.0mm
2
Power source N, V, Hz
1PH, 220-230V~, 50/60Hz
Running /Max.Running current A / A 6.6
（
2.3-9.5)/9.5 6.6(2.3-9.5)/9.5
Start Current A 3
Indoor
unit
Unit model (color) AD18LS1ERA
Fan
Type × Number CENTRIFUGALX2
Speed(H-M-L) r/min 700/540/400
Fan motor output/ input power W 28/79
Air-ow(H-M-L) m³/h 850/780/600
ESP pa 0/25
Heat exchanger
Type / Diameter mm inner grooved pipe/φ7.0
Row 2
Total Area m² /
Dimension
External(L×W×H) mm×mm×mm 1090/484/220
Package(L×W×H) mm×mm×mm 1174/545/280
Drainage pipe (material , I.D./O.D.) mm
PVC 20/24
Controller
(O-Optional,S-Standard)
Wired YR-E16(O)/YR-E17(S)
Fresh air hole dimension mm NONE
Electricity Heater kW NONE
Sound power Noise level (H-M-L) dB(A) 60
Sound pressure Noise level (H-M-L) dB(A) 43/41/35
Pipe
Liquid Pipe(mm) 6.35
Gas Pipe(mm) 12.7
Connecting Method ared
Weight (Net / Shipping) kg / kg 23/26.5
cooling Pdesignc(kW): 5.0KW SEER/CLASS 5.1/A QCE(Annual electricity consumption for cooling)kWh: 343
heating
Average Pdesignh(-10
o
C) 4.7KW SCOP/CLASS 3.8/A QHE(Annual electricity consumption for heating)kWh: 1702
Warmer Pdesignh(2
o
C) 6.0KW SCOP/CLASS 4.3/A++ QHE(Annual electricity consumption for heating)kWh: 1944
Colder Pdesignh(-22
o
C) / SCOP/CLASS / QHE(Annual electricity consumption for heating)kWh: /
Tdesignh
：
-10
℃
Tbivalent:-8
o
C TOL:-15
o
C Elbu:0
Max. cooling
condition
Indoor temperature
：
32
℃
/23
℃
Max. heating condition
Indoor temperature:27
o
C/-
o
C
Outdoor temperature
：
46
℃
/-
℃
Outdoor temperature:24
o
C/18
o
C
Norminal condition: indoor temperature (cooling): 27
o
CDB/19
o
CWB, indoor temperature (heating): 20
o
CDB
Outdoor temperature(cooling): 35
o
CDB/24
o
CWB, outdoor temperature(heating): 7
o
CDB/6
o
CWB
The noise level will be measured in the third octave band limited values, using a Real Time Analyser calibrated sound intensity meter. It is a
sound pressure noise level.