Maintenance
8
For series 602 and AB242ACEAA, AB242ACERA, AB282ACEAA, AB362ACERA,
AB482ACEAA
Clean the air filter
Instructions :
1. Open air inlet grille
2.Dismantle the air filter
3. Clean
When not for cleaning, do not dismantle the air filter, otherwise it may cause trouble.
When the air conditioner is used in a dusty environment, the air filter should be cleaned more often
(generally once every two weeks).
Pull the two handles at the same time, slowly draw
them out. (when closing it, the procedure is reversed.)
Pull the two side handles at the back of the air
inlet grille, lift the air filter to dismantle it.
Use cleaner or water to clean to remove dust.
(A) Use cleaner to remove dust.
(B) When the dust is too much, use soft brush and neutral detergent.
(C) Throw the water off, then put it in the shadow for airing.
4. Install air filter
5. Close air inlet grille
(1).Put the air filter into those extruding parts at the top of the air inlet grille.
(2).Draw the handles at the back of the air inlet grille inwards to fix the air filter.
Referring to procedure 1.
Open
Open and remove
Notice
Do not use the hot water over 50 C to clean to avoid
discoloration or deformation.
Do not dry the unit on fire, the filter may be burnt.
To Next Page
Loading...
Need help?
General
