9
Maintenance
Clean the air inlet grille
1. Open air inlet grille
2. Remove air filter
3. Remove the air inlet grille
4. Clean
Use soft brush, water and neutral detergent to clean,
then throw the water off.
Instruction
When there is too much dust
Use ventilation fan or directly spray the detergent special for kitchen
ware on the air inlet grille, 10 minutes later use water to clean.
5. Install air inlet grille
Pull the two handles at the same time, slowly draw them
out. (when closing it, the procedure is reversed.)
Referring to Clean the air filter.
Referring to procedure 3.
6. Install the air filter
Referring to Clean the air filter
Referring to procedure 1.
7. Close air inlet grille
Open
Notice
Do not use the hot water over 50 C to clean
to avoid discoloration or deformation.
Open the air inlet grille for 45 , the lift it up.
To Next Page
Loading...
Need help?
General
