Electic Control and
Debugging
427
Super Match
Note:
In the time setting state of week timing(cursor still), if no order input for 1 minute, screen saver will be activated
and it will automatically return to main interface; In which state, non-conicting orders are effective and otherwise
no interface popping out; Latter input conicting orders are ineffective with NON-SET state displaying
Figure 5
Figure 6
6. Prior to setting of weekly timer, please make time setting through main interface→ Menu→ Time interface.
8. Weekly timer setting done, it needs to exit the weekly timer interface to execute the order.
7. The slave unit of the wired controller has no setting of weekly timer.
Current clock setting
1. Proceed through main interface→Menu→Time→"Enter" key to enter, which is shown in Figure 6.
2. Default setting starts with the "Year" value, press the "rightward key" to select "Year"→"Month"→"Day"→"Hour"
→"Minute"→"Week"; or press the "leftward key" to select "Week"→"Minute"→"Hour"→"Day"→"Month"→"Year".
3. When the time to be changed has been selected, press the "Upward key" or "Downward key" to adjust the time.
4. After all the times have been adjusted, press "Enter" key to complete the setting.
Service setting
1. Proceed through main interface→Menu→Other→enter password→press "Enter" key→Service Set→press
"Enter" key to initiate the setting, which is shown in Figure 7.
Figure 7 Figure 8
To Next Page
Loading...
