428
Super Match
2. Password setting
A. Common users are provided with a four-digit password which is initially 1234; high-class users are provided with
a six-digit password 841226 which can be operated by the technical personnel only.
B. Press the "upward" key or "downward" key to select "password" and press "Enter" key to initiate password
setting, which is shown in Figure8. Password setting is intended for changing only the password of a common
user.
C. Press the "leftward" key and "rightward" key to select in the line of numbers; press the "input" key to x the
selected numbers in the password box. When password entry is completed, press the right key to proceed with
"next step". If the original password is input incorrectly, a window prompting "Wrong password" will pop out as
shown in Figure 9. Press "Enter" or "Cancel" in this window to return to the gure 8.
Figure 9 Figure 10
D. If the "original password" is entered successfully, a window will pop out as shown in Figure 10 prompting "New
password"; enter the password in the same way as described above and then press "Enter" key again to conrm
successful setting of new password or press "Cancel" key to cancel the password setting.
E. If the new password has been set successfully, a window prompting "New password set Successfully!" as shown
in Figure 11 will appear; press "Enter" or "Cancel" to return to the previous menu.
Figure 11 Figure 12
3.Restore the initial password
A. Select "Password recovery" as shown in Figure 7 and then press "Enter" key to enter the interface as shown in
Figure 12; press the left key "Cancel" or the right key "Enter" to cancel this operation or conrm restoration of the
initial password.
B. This operation here is used for restoring only the password of a common user.
To Next Page
Loading...
