11
Operation
2
3
1, 7
Auto, Cool, Heat and Dry
4
5
6
C
HEALTH
SET RECOVERY
CHECK
(7) Power off:
Press the ON/OFF button. Indoor unit will be powered off,
and there are only the time and the ambient temperature
in the screen.
(6) Set HEALTH operation:
Press the HEALTH button to set the indoor health function.
Press it once, [HEALTH] will display in the display section,
and indoor health function is valid. Press it again, [HEALTH]
will disappear, and the health function is invalid. This function
is valid only for the unit with health function.
(5) Select SWING function:
Press the SWING button once, [SWING] will display and
swing function is valid. Press again, [SWING] will disappear
and swing function is invalid.
(3) Set temperature:
Press the TEMP + or - button. Each press, setting
temperature will increase or decrease by 1 C ( F). [SET
TEMP.] appears on the display.
(1) Start up operation:
Press the ON/OFF button. The system will start up and the
display will be on LCD.
(4) Select fan speed:
Press the FAN button. Each press, fan speed in the [FAN]
display section changes as follows:
[AUTO] [HIGH] [MED] [LOW] [AUTO].
Select proper fan speed.
(2) Select operation mode:
Press the MODE button. Each press, operation mode in
the [MODE] display section changes as follows:
[FAN ONLY] [COOL] [DRY] [HEAT] [AUTO]
[FAN ONLY].
Select operation mode ([COOL],[DRY],[HEAT],or [AUTO]).
To Next Page
Loading...
