Haier AD182AMEAA - Operation; Start Up, Shut Down, and Mode Selection

10
Operation
2
3
1, 4
C
HEALTH
SET RECOVERY
CHECK
Fan Only
(2)Select operation mode :
Press the MODE button. Each press, operation mode in
the [MODE] display section changes as follows:
[FAN ONLY] [COOL] [DRY] [HEAT] [AUTO]
[FAN ONLY].
Select [FAN ONLY].
(3)Select fan speed:
Press the FAN button. Each press, fan speed in the [FAN]
display section changes as follows:
[HIGH] [MED] [LOW] [HIGH].
Select proper fan speed.
(4)Power off:
Press the ON/OFF button. Indoor unit will be powered off,
and there are only the time and the ambient temperature
in the screen.
(1)Start up operation:
Press the ON/OFF button. The system will start up and the
display will be on LCD.
VENTILATION mode
(only for the unit with fresh air function or heat recovery function)
Press the RECOVERY button, then the unit will switch over the ventilation mode:
[ ] [VENTILATION][AUTO] [VENTILATION][RECOVERY] [VENTILATION][NORMAL] [ ]
Please select appropriate ventilation mode.