[FAN]
[AUTO]:Auto fan running.
[HIGH]:High fan speed.
[MED]:Medium fan speed.
[LOW]:Low fan speed.
[FIX]:Fixed fan speed, it will display only when fixed fan
speed is requested to main indoor unit.
[CENTRAL]:Central control mode.
[OPERATION]:Running mode.
[STAND BY]: Waiting mode.
[PRE-HEAT]: Pre-heating mode.
[DEFROST]: Defrosting mode.
[FILTER]: Request of filter to be cleaned.
[HEALTH]:Health function.
[CEN.ADD]:Central control address, the address number
will display on "88".
[SYS.ADD.]:System address, the address number will
display on "88".
[CHECK]:Auto-diagnostic, trouble shooting.
[DEMAND]:Compulsory operation function, when it works,
[CENTRAL] will flash.
[SWING][MANUAL]:Swing mode.
[ROOM TEMP.]:Indoor ambient temperature.
[SET TEMP.]:Set admired temperature.
[VENTILATION]
[AUTO]:Auto ventilation mode.
[NORMAL]:Normal ventilation mode.
[RECOVERY]:Fully heat exchanging ventilation mode.
[CLOCK]:Clock display, the displaying time is the current
time of the clock.
[UP],[DOWN]:Indicator of filter elevating.
[TIMER]
[ON]:Timer function is on.
[OFF] :Timer function is off.
[ON][OFF] :Timer function is ON-OFF.
[ON][OFF][DAILY]:Timer ON-OFF will switch over in turn
daily.
9
Parts and Functions
[MODE]
[AUTO]:Auto operation mode.
[FAN ONLY]:Air-throwing mode.
[COOL]:Cooling operation mode.
[DRY]:Dehumidification mode.
[HEAT]:Heating operation mode.
[TES]:In heating mode, auxiliary electric heater is running.
Only when the unit with auxiliary electric heater is in
auxiliary electric heating mode, it will display.
HEALTH
SET RECOVERY
CHECK
F
C
To Next Page
Loading...
