6
PROPER USE & CARE
1. Empty the bucket manually
When the water bucket is full, the red indicator light ”BUCKET FULL” will go on.
1. YOU MUST turn the POWER off.
2. Wait a few minutes to allow the water to stop dripping.
3. Use both side handles to lift and remove the bucket.
4. Empty water through opening into a sink or tub.
5. Reinstall bucket.
IMPORTANT
Make sure the drain cap is tightened before operating the unit.
2. Attach a standard garden hose
It is normal for the surrounding air to become slightly warmer as the dehumidifier operates.
This warming effect further reduces the relative humidity of the surrounding air.
THERE ARE TWO WAYS TO REMOVE WATER FROM THE BUCKET:
To Next Page
Loading...
