Haier GWT750AW - PARTS AND FEATURES; Component Identification

3.Connecttheotherendofthehosestotheirrespectivewasherinletlocatedat
therearofthewasher.
NOTE:Hotwaterneedstobeatatemperatureofatleast120ºF-140ºF.(49ºC
-60ºC)forthesoaptodissolveandtoavoidsoapresidueremainingon
clothes.
4.Usingthedrainhoseclamp.Attachthedrainhosetotheunitasshownbelow.
Installthedrainhosehooktotheouterdrainhosetube.
5.Pluginthewashertoaregular120volt~60Hz,15ampoutlet.
Drainhosehook
Drainhoseclamp
Drainhosejoint
8
English English