Need help?Do you have a question about the Haier GE GFW510SCN0 and is the answer not in the manual?
General safety advice and warnings for service personnel.
Warning to disconnect power before servicing.
Instructions for reconnecting grounding devices after service.
Required safety gear for service technicians.
Procedure to ensure the appliance is safely de-energized.
Explanation of the letters and numbers in the model number.
How the serial number indicates month and year of manufacture.
Electrical resistance specs for various components.
Thermistor resistance values at different temperatures.
Water levels and corresponding voltage outputs.
Steps for starting a wash cycle and using ULTRAFRESH VENT.
Interpretation of the main display showing time and cycle status.
Meaning of various icons like Wi-Fi, Venting, Control Lock, Door.
Diagram and labels for control panel elements.
Diagram and labels for control panel elements.
How to wake up, standby, start, pause, and restart cycles.
Explanations of various wash cycles and their uses.
Details on SANITIZE and other specific cycles.
How to adjust soil level, water temperature, and spin speed.
Features like SmartDispense, My Settings, Power Steam.
Functionality for delaying or remotely starting a wash cycle.
How to connect and use the Wi-Fi feature.
Features like Time Saver and More Water.
System for eliminating moisture and preventing odors.
Steps to activate and cancel the ULTRAFRESH VENT feature.
Details on 1 STEP WASH + DRY, Tumble Care, PreWash, AutoSoak, Extra Rinse.
Operation of basket light, sound volume, and control lock.
How to open/close drawer and use HE detergents.
Proper use of detergent, bleach, and softener compartments.
Instructions for cleaning the drain pump filter monthly.
Information about the drain hose extension kit.
Default soil, temp, spin, and cycle times.
Kit details, installation requirements, and preparation steps.
List of tools and components for stacking installation.
How to install dryer legs and spacers.
Guidance on selecting and installing stacking brackets.
How to attach brackets to the washer.
Steps to prepare the units for stacking.
How to lift and attach the dryer to the washer.
Steps for leveling and positioning.
Identification of components visible from the top.
Identification of components visible from the front.
Identification of components visible from the rear.
Identification of components within the dispenser.
Labels and functions of connectors on the main board.
UI board details, diagnosis, and removal.
Accelerometer board details, diagnosis, and removal.
Inverter board details, diagnosis, and removal.
Wi-Fi board details and removal.
Step-by-step guide to remove the control panel.
Step-by-step guide to remove the top panel.
Step-by-step guide to remove the washer door.
Steps to reverse the door swing.
Steps for striker reversal and terminal holder disconnection.
Steps to remove and install the lock assembly on the other side.
Steps to reconnect pin connector and replace door assembly.
How the door lock operates and how to diagnose it.
Steps for removing and reversing the lock assembly.
Step-by-step guide to remove the back cover.
Step-by-step guide to remove the front panel.
Purpose, checks, and removal of the damper.
Purpose, checks, and removal of the overnight dry fan.
Purpose, checks, and removal of the tub light.
How the gasket seals and how to remove it.
Detailed steps for removing hoses and clamps from the gasket.
Steps for lubricating, positioning, and securing the tub gasket.
Flowchart showing how the heater operates.
Electrical specs, removal, and installation of the heater.
How it works, tests, and resistance table.
How to diagnose and remove the UI board.
How to diagnose and remove the Wi-Fi board.
How to diagnose the main board.
Step-by-step guide to remove the main board.
How to diagnose and remove the accelerometer board.
How to diagnose and remove the inverter board.
Sensor location, function, and diagnosis.
Chart of water levels and voltage outputs.
Valve types, flow rates, and their specifications.
Step-by-step guide to remove the water valve assembly.
How the dispenser assembly automatically dispenses products.
Step-by-step guide to remove the dispenser assembly.
Filter access and pump operation details.
Step-by-step guide to remove the drain pump.
Motor details, checks, and removal procedure.
Final steps for removing the motor.
Description of dampers and how to remove them.
Construction and step-by-step removal of the outer tub.
Detailed steps for removing components from the outer tub.
Final steps for removing springs and the rear tub half.
Pre-testing checks before using Service Mode.
Explanation of helpful messages displayed to the consumer.
How to enter and exit consumer fault code mode.
How to enter, exit, and use the service mode.
Descriptions of various service mode tests for components.
Descriptions of various service mode tests for components.
Descriptions of various service mode tests for components.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Wiring diagram for GFW510/GFW550 models.
Wiring diagram for GFW650/GFW850 models.
General safety advice and warnings for service personnel.
Warning to disconnect power before servicing.
Instructions for reconnecting grounding devices after service.
Required safety gear for service technicians.
Procedure to ensure the appliance is safely de-energized.
Explanation of the letters and numbers in the model number.
How the serial number indicates month and year of manufacture.
Electrical resistance specs for various components.
Thermistor resistance values at different temperatures.
Water levels and corresponding voltage outputs.
Steps for starting a wash cycle and using ULTRAFRESH VENT.
Interpretation of the main display showing time and cycle status.
Meaning of various icons like Wi-Fi, Venting, Control Lock, Door.
Diagram and labels for control panel elements.
Diagram and labels for control panel elements.
How to wake up, standby, start, pause, and restart cycles.
Explanations of various wash cycles and their uses.
Details on SANITIZE and other specific cycles.
How to adjust soil level, water temperature, and spin speed.
Features like SmartDispense, My Settings, Power Steam.
Functionality for delaying or remotely starting a wash cycle.
How to connect and use the Wi-Fi feature.
Features like Time Saver and More Water.
System for eliminating moisture and preventing odors.
Steps to activate and cancel the ULTRAFRESH VENT feature.
Details on 1 STEP WASH + DRY, Tumble Care, PreWash, AutoSoak, Extra Rinse.
Operation of basket light, sound volume, and control lock.
How to open/close drawer and use HE detergents.
Proper use of detergent, bleach, and softener compartments.
Instructions for cleaning the drain pump filter monthly.
Information about the drain hose extension kit.
Default soil, temp, spin, and cycle times.
Kit details, installation requirements, and preparation steps.
List of tools and components for stacking installation.
How to install dryer legs and spacers.
Guidance on selecting and installing stacking brackets.
How to attach brackets to the washer.
Steps to prepare the units for stacking.
How to lift and attach the dryer to the washer.
Steps for leveling and positioning.
Identification of components visible from the top.
Identification of components visible from the front.
Identification of components visible from the rear.
Identification of components within the dispenser.
Labels and functions of connectors on the main board.
UI board details, diagnosis, and removal.
Accelerometer board details, diagnosis, and removal.
Inverter board details, diagnosis, and removal.
Wi-Fi board details and removal.
Step-by-step guide to remove the control panel.
Step-by-step guide to remove the top panel.
Step-by-step guide to remove the washer door.
Steps to reverse the door swing.
Steps for striker reversal and terminal holder disconnection.
Steps to remove and install the lock assembly on the other side.
Steps to reconnect pin connector and replace door assembly.
How the door lock operates and how to diagnose it.
Steps for removing and reversing the lock assembly.
Step-by-step guide to remove the back cover.
Step-by-step guide to remove the front panel.
Purpose, checks, and removal of the damper.
Purpose, checks, and removal of the overnight dry fan.
Purpose, checks, and removal of the tub light.
How the gasket seals and how to remove it.
Detailed steps for removing hoses and clamps from the gasket.
Steps for lubricating, positioning, and securing the tub gasket.
Flowchart showing how the heater operates.
Electrical specs, removal, and installation of the heater.
How it works, tests, and resistance table.
How to diagnose and remove the UI board.
How to diagnose and remove the Wi-Fi board.
How to diagnose the main board.
Step-by-step guide to remove the main board.
How to diagnose and remove the accelerometer board.
How to diagnose and remove the inverter board.
Sensor location, function, and diagnosis.
Chart of water levels and voltage outputs.
Valve types, flow rates, and their specifications.
Step-by-step guide to remove the water valve assembly.
How the dispenser assembly automatically dispenses products.
Step-by-step guide to remove the dispenser assembly.
Filter access and pump operation details.
Step-by-step guide to remove the drain pump.
Motor details, checks, and removal procedure.
Final steps for removing the motor.
Description of dampers and how to remove them.
Construction and step-by-step removal of the outer tub.
Detailed steps for removing components from the outer tub.
Final steps for removing springs and the rear tub half.
Pre-testing checks before using Service Mode.
Explanation of helpful messages displayed to the consumer.
How to enter and exit consumer fault code mode.
How to enter, exit, and use the service mode.
Descriptions of various service mode tests for components.
Descriptions of various service mode tests for components.
Descriptions of various service mode tests for components.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Descriptions, trigger conditions, and actions for fault codes.
Wiring diagram for GFW510/GFW550 models.
Wiring diagram for GFW650/GFW850 models.
General| Type | Front Load Washer |
|---|---|
| Capacity | 4.8 cu. ft. |
| Energy Star Certified | Yes |
| Spin Speed | 1300 RPM |
| Color | White |
| Control Type | Electronic |
| Width | 28 in |
| Voltage | 120V |
| Frequency | 60 Hz |
| Delay Start | Yes |
| Child Lock | Yes |
| Warranty | 1 Year Limited |
| Height | 39.75 in |
To Next Page
