Haier HBU-42CH03 User Manual

1. INDOOR UNIT SIDE
(1) Remove the electric component box.
(3) Remove the electric component box cover.
Fig. 24
Base
Electric component box cover
Remove the three tapping screws.
(1) Remove the cord clamp.
(2) Process the end of the connection cords to the
dimensions shown in Fig.
(3) Connect the end of the connection cord fully into the
terminal block.
(4) Wiring
(4) Fasten the connection cord with a cord clamp.
(5) Fasten the end of the connection cord with the
screw.
CAUTION
Be careful not to pinch the lead wires
between the electric component box
and base.
Fig. 21
Electric component box
Fig. 22
Electric component box
Remove the four tapping
screws.
CAUTION
Do not remove the screws. If the screws
are removed, the electric component
box will fall.
(2) Pull out the electric component box.
Fig.23
Electric component box
45678HJ
4-H. 5-J. 6 7
E@CP04;@C36
4LE/5530563Qm/83El
LKRBM
NPLLHS=
KPOAKKM PJFO
OBMIFJF>H ?HK@G
FJAKKM PJFO
OBMIFJF>H ?HK@G
45678HJ
4-H. 5-J. 6 7
E@CP04;EC36
4LE/5530563Qm/83El
LKRBM
NPLLHS=
KPOAKKM PJFO
OBMIFJF>H ?HK@G
FJAKKM PJFO
OBMIFJF>H ?HK@G
4LE/5530563Qm/83El
LKRBM
NPLLHS=
45678
E@CP05;EC36
FJAKKM PJFO
OBMIFJF>H ?HK@G
HJ
S2D
HJ678
E@CP05;@C36
LKRBM NPLLHS=
456
HJ
456
S2D
4LE/5530563Qm/83El
FJAKKM PJFO
OBMIFJF>H ?HK@G
KPOAKKM PJFO
OBMIFJF>H ?HK@G
25
Fig. 25
-57-
Installation

Haier HBU-42CH03 Specifications

General

Brand	Haier
Model	HBU-42CH03
Category	Air Conditioner
Language	English