How to fix no picture on Haier HL TV DVD Combo?
If your Haier TV DVD Combo shows no picture, first ensure it's properly plugged in and that electricity is available. Then, check if the correct signals are being input. Try pressing the INPUT button to switch to TV input. You might also need to fine-tune, manually scan, or adjust the antenna.
Why is there no sound on my Haier HL TV DVD Combo?
If you're not getting any sound from your Haier TV DVD Combo, check the sound system first to make sure it's set up correctly. Then, press the VOL+ button to increase the volume and see if that resolves the issue. Also, press the Mute button to ensure Mute mode isn't enabled.
What to do if my Haier HL TV DVD Combo has spots with some pictures?
If your Haier TV DVD Combo is displaying spots with some pictures, ensure the antenna is correctly connected and in good condition. Also, fine-tune the channel.
Key safety guidelines for operating the TV, including warnings and precautions.
Diagram and identification of all input/output ports on the back of the TV.
Detailed explanation of each button function on the remote control.
How to connect external devices like VCRs, DVD players, and computers.
How to select the active input source for connected devices.
Adjusting picture quality settings like brightness, contrast, and color.
Adjusting sound settings such as equalizer, balance, and surround sound.
Information on supported USB file formats and device requirements.
Instructions for inserting discs, starting playback, and using basic controls.
Steps to access and configure general DVD player settings.
Setting up parental locks and changing the system password.
Solutions for problems like blank screens, no sound, or poor audio.
How to fix issues with color, picture quality, or channel reception.
Details on warranty coverage, duration, and how to obtain service.
Key safety guidelines for operating the TV, including warnings and precautions.
Diagram and identification of all input/output ports on the back of the TV.
Detailed explanation of each button function on the remote control.
How to connect external devices like VCRs, DVD players, and computers.
How to select the active input source for connected devices.
Adjusting picture quality settings like brightness, contrast, and color.
Adjusting sound settings such as equalizer, balance, and surround sound.
Information on supported USB file formats and device requirements.
Instructions for inserting discs, starting playback, and using basic controls.
Steps to access and configure general DVD player settings.
Setting up parental locks and changing the system password.
Solutions for problems like blank screens, no sound, or poor audio.
How to fix issues with color, picture quality, or channel reception.
Details on warranty coverage, duration, and how to obtain service.
General| Built-in DVD Player | Yes |
|---|---|
| Headphone Jack | Yes |
| Tuner | ATSC/NTSC |
| Resolution | 1366 x 768 |
| HDMI Ports | 1 |
| USB Port | 1 |
| Component Input | 1 |
| Composite Input | 1 |
| Sound Output | 10W |
To Next Page
