What to do if my Haier HLC26R1 has no sound?
If there is no sound on your Haier TV DVD Combo, first, press the Mute button to verify if Mute mode is enabled. Second, switch to another channel to see if the issue persists. Finally, press the VOL+ button to increase the volume and check if the problem is resolved.
How to fix no picture on some channels on Haier HLC26R1?
If your Haier TV DVD Combo has no picture on some channels, first, verify that the correct channel is selected. Second, adjust the antenna. Finally, make adjustments using Fine Tune and Manual Scan.
What to do if my Haier HLC26R1 is out of control?
If your Haier TV DVD Combo is out of control, disconnect it from the power supply. Wait 10 seconds, then reconnect the television to the power supply.
Why is my Haier HLC26R1 showing horizontal bars and picture shaking?
If your Haier TV DVD Combo is showing horizontal or vertical bars, or the picture is shaking, check for local interference from devices such as an electrical appliance or power tool.
Why is my Haier TV DVD Combo screen blank?
If your Haier TV DVD Combo screen is blank, first, verify that the correct signals are being input. Second, press the INPUT button to change the signal input to TV. Finally, if the power supply was interrupted, restart the television.
Read and keep safety instructions for proper use and maintenance.
Details of the TV's side panel and DVD control buttons.
Guide to connecting various external devices to the TV.
Guide to connecting various external devices (VCR, DVD, PC, etc.) to the TV.
General| Screen Size | 26 inches |
|---|---|
| Resolution | 1366 x 768 |
| DVD Player | Yes |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Display Technology | LCD |
| Aspect Ratio | 16:9 |
| VGA Port | Yes |
| Built-in Speakers | Yes |
To Next Page
