What to do if my Haier HLP21N leaks water?
If water is leaking from your Haier Washer, check the hose connections at both the faucets and the washer to ensure they are tight. Also, verify that the drain hose connection at the washer is secure and properly positioned in the drain. If the water leaks continue and the source is undetermined, it is recommended to call a qualified plumber.
How to unlock the lid of my Haier HLP21N?
If your Haier Washer lid won't open, the lid might be locked. Press the Start/Pause button to stop the washer. It may take a few moments for the lid lock to disengage.
Why is my Haier HLP21N making a thumping sound?
If your Haier Washer is making a thumping sound, it could be due to an unbalanced wash load. Pause the washer and redistribute the items in the wash basket to balance the load.
How to fix a Haier HLP21N that won't drain?
If your Haier Washer isn't draining water, ensure the drain hose is properly connected to the washer. The top of the drain outlet must be at least 39 inches (99 cm) above the floor for proper drainage. Also, check the sink or drainpipe for any clogs and remove any blockages.
How to stop my Haier HLP21N from vibrating?
If your Haier Washer is vibrating, check that all four feet are resting firmly on the floor and that the washer is level.
Why my Haier Washer does not run?
If your Haier Washer doesn't run, there might be several reasons. First, ensure the power cord is correctly plugged into a grounded, three-prong outlet. Check your circuit breaker or fuse box and reset the breaker or replace the fuse if necessary. An overloaded or unbalanced load can also prevent the washer from running; try removing or redistributing items. If you've selected the Delicate cycle, the washer may be pausing for a soak. Finally, make sure the washer lid is fully closed.
Why is the water temperature wrong in my Haier HLP21N?
If the water temperature in your Haier Washer is too warm or cold, ensure your water heater is set to a temperature between 120ºF - 140ºF (49ºC - 60ºC). Also, check that the water inlet hoses are properly connected—hot to hot and cold to cold.
Why is the water flow slow in my Haier HLP21N Washer?
If water is filling slowly in your Haier Washer, make sure the water inlet faucets are fully turned on. Also, ensure that the water fill hose is not tangled, kinked, or pinched.
What causes rattling or clanking in a Haier HLP21N?
If your Haier Washer is rattling or clanking, stop the washer and check for any foreign objects like keys or coins inside.
Why are my clothes worn after washing in Haier HLP21N?
If your clothes are appearing older and worn after washing in your Haier Washer, you might be using the wrong wash cycle or water temperature. Follow the clothing manufacturer’s instructions for garment care.
General| Water consumption per cycle | - L |
|---|---|
| Energy consumption washing per cycle | - kWh |
| Dimensions (WxDxH) | 447 x 438 x 760 mm |
| Power requirements | 120V, 60Hz |
| Door hinge | Up |
| Drum volume | 28 L |
| Loading type | Top-load |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | No |
| Appliance placement | Freestanding |
| Drum capacity | - kg |
| Spin-drying class | - |
| Maximum spin speed | 700 RPM |
| Number of washing programs | 3 |
| Package weight | 51800 g |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 438 mm |
|---|---|
| Width | 447 mm |
| Height | 760 mm |
| Weight | 43000 g |
